Skip to main content

Powder-based additive manufacturing for on-orbit manufacturing

Running

Running

Prime contractor
Organisational Unit
Implementation progress
30%
01 May 2022

Duration: 36 months

Objective

In recent years, there has been a resurgence in efforts for space exploration beyond Earth with plans for sending humans to the surface of the Moon and Mars (ESA Website). However, such long-term exploration missions are deemed prohibitively expensive if they solely rely on the shipment of materials and equipment from Earth. To make such missions a reality, in-situ resources must be used for on-site/on-orbit production of equipment and tools. Powder-based additive manufacturing (PBAM) is arguably the most promising process that enables the rapid production of weight-sensitive/multi-functional parts at small volumes and hence is a strong candidate for maturation for long-term future space missions to address the on-orbit manufacturing challenge. The process relies on three main stages: (1) deposition of a layer of fine powder (Dp≈30 µm) to form a powder bed (~50 µm thick); (2) laser heating; (3) fusion of the grains through melting and solidification. The aim of this project is to deliver a totally new PBAM concept for a microgravity 3D printer for the production of small tools and components (O(50 cm)). This will be achieved by recruiting two Ph.D. students (co-funding) to develop beyond state-of-the-art powder handling techniques including the use of dynamics-field ultrasonic devices to deliver the powder and stabilize the bed at the microgravity conditions. In 2019 the German Space Centre attempted to developing a microgravity 3D printer. However, their design uses air suction to replace gravity for stabilization of the bed which poses various technical issues such as difficulty in maintaining the gas flow after several layers of powder are applied. The proposed acoustic locking by utilizing dynamic-field ultrasonic devices will offer many advantages including online digital process control (via micro-controllers), it is non-intrusive to the process and could be applied to multiple layers of powder.

Contract number
4000134797
Programme
OSIP Idea Id
I-2020-00873
Related OSIP Campaign
Open Channel
Main application area
NEW
Budget
85432€
Powder-based additive manufacturing for on-orbit manufacturing